Error added: 2025-02-16T11:26:15Z
If it's a USB storage device, try Get the USB address from lsusb Then add usb-storage.quirks=xxxx:yyyy:u to /boot/firmware/cmdline.txt and reboot After rebooting, dmesg | grep usb-storage should show something like this. [ 0.374083] usbcore: registered new interface driver usb-storage [ 1.028205] usb 3-2: UAS is ignored for this device, using usb-storage instead [ 1.028244] usb 3-2: UAS is ignored for this device, using usb-storage instead [ 1.028247] usb-storage 3-2:1.0: USB Mass Storage device detected [ 1.028425] usb-storage 3-2:1.0: Quirks match for vid xxxx pid yyyy: 800000 [ 1.028461] scsi host0: usb-storage 3-2:1.0 Now smartctl --all /dev/yourdevice should show the right info.
If you know the answer, please add your own solution below.
If you don't know, but find out later, please come back and share your answer - there will be other people
struggling with this too.
If you want to be notified via email when this is solved, enter your email address here: